Are You Getting The Most You Double Glazed Window Repair?

Double Glazed Window Repair

Double glazing is an energy efficient investment that stops heat loss in the winter and keeps your home cooler in the summer. Restoring your double-glazed windows as needed is a great way to ensure they remain in good condition.

Over time your double glazed windows may suffer from issues such as condensation and misting. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A rogue ball or a flying stone from your lawnmower or even a strong storm can shatter your double pane windows, leaving you home vulnerable to the elements. Although a window that is cracked can be difficult to fix however, you don't have to replace it entirely. The insulated glass that is between two glass panes is in good condition and you can fix your double-paned window on your own.

To start, you'll need to take the broken glass out of the frame. This is messy work, and you'll want to be careful to stop glass shards from falling on the floor or sliding out of the frame. Make sure you wear gloves to shield your hands from injury and a rag to cover the area around the broken glass to avoid further cuts or breakage. After removing the broken pane take care to clean the entire frame of the window to eliminate any remaining sealant and debris. Sand rough areas of the window frame to create a smooth surface on which to put in your new glass.

After cleaning the frame, you can apply a fresh layer of glazing to the area where the damaged pane was removed. This is the best way to keep your window safe and sealed and will save you money by keeping water and drafts from entering your home. The next step is to select your glazing material. There are several options available, including clear tape that is more durable than regular tape and will help keep your window safe from further cracking, and glazing film that is similar to clear plastic wrap. This option has the advantage that it can be painted to match your frame and will also keep out rain and ice.

Whatever material you decide to use it is important to press the glazier's points into the gap where the putty meets your frame. These will hold the glass in place, and will help it stick to the frame. Hardware stores sell glazier's ropes, which you can use on the frame rabbets.

Condensation

Double glazing is susceptible to condensation issues and if you encounter this issue, it is best to call the company that supplied the window. Many companies offer warranties and guarantees that provide coverage for these problems. Fogging or condensation on the windows' panes is a sign that the seals are broken. Only an expert can fix this issue by replacing both panes.

This process is a little tricky and requires the use of special tools to remove the old pane and install the new one, however it is possible to do this by an expert who will provide the necessary equipment. Utilizing these tools could be dangerous, so it is always best to leave this kind of job to a professional.

Wear safety glasses and gloves if you decide to do it yourself. You could be exposed to flying glass fragments. It is also essential to remove all the putty and metal glazing points from the grooves where the new window will be.  window repairs -brushing the frame or vacuuming a damp cloth is also recommended. When the frame is dry and clean you'll need to order a piece of replacement glass that is 1/8 inch shorter in each direction than the existing window and test-fit it in the grooves.

Based on the frame you have, you will then need to apply the caulk on the grooves to ensure that the new pane is securely in position. After the caulk is dry and is dry, you must smooth it and make any needed adjustments. Then the wood molding can be reinstalled.

Double-glazed windows can be difficult to open and close in the event of extreme weather. Extreme temperatures can cause frames to expand or shrink and cause them to fall or stick. You can try wiping the frames with water and then lubricating them in the event that this happens however, it's better to consult the company who installed your windows.

Misted

If moisture is trapped between the glass panes, it can cause misted double glazing. Double glazing is comprised of two panes of glass that are separated by an insulating space typically filled with argon gas to provide better thermal efficiency. This creates an airtight seal that keeps warm air inside and cold air outside and allows you to keep the temperature at a comfortable level in your home.

Over time however, this seal can break down and moisture will start to accumulate between the window panes, which causes them to become cloudy. This happens because the space between the panes is heated by the sun, which causes water vapour to form within it.

This is a normal thing to happen however, if it occurs between the window panes it can cause a problem as it can no longer regulate the temperature of the room and allow the outside temperature to affect the indoor temperature. Northfield Glass can help you if your double-glazed windows start to fog.

We can replace the individual sealed blown unit without having to replace the whole window, which is a lot less disruptive than a total replacement. Our misty glass repair involves removing and cleaning the glass before replacing it with a brand new one. This creates a watertight seal again.

Certain companies in the business claim that they can inject chemicals through holes drilled into misted windows to remove the condensation and fog. We do not recommend using this method. This is not only unattractive, but could also damage your toughened glass leaving you with a window which does not function properly.

It is important to fix the issue as soon as you can, as if untreated, it can result in the growth of mould that not only damages the window but also poses health risks to your family members. Moisture can also cause issues within your home, like dampness or rot. In some cases windows, they may have to be replaced completely.

Blown or failed

Modern double-glazed windows come with two glass panes that have an inert gas or air between them. This improves their thermal efficiency, keeping the cold out and heat in. As time passes, the gas can be depressurized and cause many issues.

Condensation between panes is one of the most frequent. It is not a sign of a window failure however it could be a sign you should reseal the windows. Condensation can also be an indication of a damaged double glazing, which could require a re-installation.

It is also important to look for draughts that are coming from your double glazed windows. This could be caused by a failure of the seal or a broken handle or lock. It is essential to fix this issue as soon as possible. A draught will cause you to pay more for heating. Test the seals around the window frame by feeling for cold air.

Another indication that the seals on your windows have failed is when you begin to notice water beads on the inside of your windows. This is an indication that you need to seal your double-glazed windows.

Your window frames are designed to move a bit in order to do to keep the glass sheets in the right place. Over time, this special packaging material may be compressed. This could cause the seal to become broken. This will allow air to circulate between the panes and reduce the energy efficiency of your window.

A seal that is blown is a clear sign that your double glazing has failed and needs to be fixed immediately. A blown seal stops your double glazing from performing its primary purpose that is to keep the cold out and warm air in. A damaged seal could let moisture into your home, which could lead to mold and other unpleasant conditions. It is important to contact a specialist in double glazing repair as soon as you discover a blowing seal on your double-glazed windows, as they are able to replace the whole unit.